Map
About Us
Products and Services
FAQs
Our experienced swimming pool technicians are trade licenced for repair work to your pool and equipment.
We strive to have the tools and knowledge on hand to solve your swimming pool problems as quick as possible.
We ensure our staff are highly knowledgeable and trained to give you the support you need when it comes to your pool.
Open Monday - Friday, Open Saturdays
Chemicals, Chlorinators, Cleaners, Covers, Filters, Liquid Chlorine, Motors, Pool Lights, Pumps, Roller Systems, Salt Cells, Spare Parts, Water Analysers
Fibreglass
Water Balancing
Aquaquip, Baracuda, Clearwater, Daisy, Davey, Focus, Hayward, Hurlcon, Jetvac, Kreepy Krauly, Monarch, Polaris, Poolrite, Poolvac, Rola Chem, Saltmate, Sun, Waterco
Australian Made, Delivery, Family Operated, Family Owned, Free Quotes, Inspections, Insured, Licensed, Mobile Service, Warranties
Brush any visible wall algae into the water and superchlorinate the pool with liquid or granular chlorine, running the filtration for at least 6 hours afterwards. If your pool water becomes cloudy and does not clear quick enough with normal filtration you may need to add a floccing agent to send all the suspended dead algae in the water to the bottom of the pool so it can vacuumed out to waste.
*Check pool filter. Backwash or clean if necessary to improve water flow which will increase suction, *Check skimmer and pump baskets and remove leaves and other debris, *Make sure pump is filling up properly and that the water coming back into the pool is strong. If not this could indicate a blockage and may require a visit by one of our technicians.
If pool water testing indicates low or no free chlorine make sure your other levels are balanced - especially stabiliser. If these levels are out the chlorine being added does not last long. If these levels are good, the quantity or frequency of your chlorine dosing may need to be increased, or if saltwater chloinated then the running time or output may need to increased.
*Make sure the swivel is moving freely, *Adjust the hose length by adding or removing a section of hose, *Make sure the return to pool water flow is not interfering with the movement of the pool cleaner, *Attach a deflector ring on to the pool cleaner swivel.
